Cement trailers, cement tankers, and pneumatic trailers are all names for bulk cement transport trailers. It is commonly used to transport cement, flour, lime powder, mineral powder, fly ash, and other bulk cargoes of some powder materials, with a diameter of 0.01mm.
On large construction sites, cement plants, and warehouses, Bulk Cement Transport Trailers are common. On the bulk cement trailer, an air compressor is usually used to ensure that the powder comes out of the tank.
A Bulk Cement Transport Trailer's Basic Design
1. The computer operating system
2. Power supply: the engine set provides power to the air compressor; power take-off: the engine power is extracted and transmitted to the air compressor via the transmission shaft.
3. An air compressor that is portable.
4. Air intake, distribution, pressure relief, secondary blowing, and so on are all examples of air pipes.
5. Tank, a material-loading container that is sealed.
6. Loading and unloading device: the loading tank can be connected to the material conveyance storage tower pipeline, which is controlled by a butterfly valve.
What Is The Bulk Cement Transport Trailer's Main Purpose?
Bulk cement is transported in bulk using the Bulk Cement Transport Trailer. During bulk powder transportation from the factory to the road, storage, and use, the dry powder does not need to be packed in paper bags.
The dry powder will be transported by special trucks, trains, ships, containers, and other special vehicles. Because of its excellent social and economic reputation, many countries have embraced this mode of transportation.
What Is the Safest Way to Use a Cement Bulker?
If the Bulk Cement Transport Trailer hasn't been used in a while, start the air compressor first and blow it 2-3 times before restarting it. After the experiment is complete, make a record and then load the cement.
2. When the tank has air pressure, it is strictly forbidden to open the inlet cover. To begin, open the air release valve. To be sure, the value of the pressure indicator is zero. Only when there is no air released from the air outlet pipe can the inlet cover be opened.
3. The pressure must be slightly lower when the discharge valve is opened when unloading the cement to a common warehouse on the ground (no joint).
4. Using brakes to increase loading capacity is expressly prohibited.
5. When loading, a filter should be installed in the feeding port to prevent agglomerated cement, paper bags, cotton yarn, and other materials from entering the tank and causing unloading issues.
6. Check for lubricating oil leaks in the air compressor of the Bulk Cement Transport Trailer on a regular basis. To avoid causing damage to the compressor, it should be replenished as soon as possible.
Concluding thoughts
To summaries, it is critical to consider all aspects when purchasing a Bulk Cement Transport Trailer for the transportation of powdery materials. If you require semi-trailer products, you are welcome to choose our company. Only at https://www.sunskytrailer.com/ can we provide a price consultation service and the best deals.